3C Electronics Industry Mold Market Size

Complete data on the 3C electronics mold market size (2024–2026, domestic + global, by different definitions).

I. Core Definition Distinction (Source of Data Differences)

1. Narrow-scope 3C precision plastic molds: Injection molds for mobile phones, laptops, tablets, TWS, wearables, and consumer electronics (mainstream industry report definition)

2. Broad-scope electronic information molds: 3C consumer electronics + communication base stations + automotive electronics + industrial electronics, including injection, die-casting, stamping, and connector molds

Total mold market across all categories: China's total mold market reached RMB 420 billion (2025), with electronic molds as the second largest segment, after automotive molds.

II. China Market Size (Authoritative Industry Statistics, 2025–2026)

1) Narrow-scope 3C Consumer Electronics Plastic Molds (Most Commonly Used)

• 2024: RMB 45.3 billion, YoY +6.5%

• 2025: RMB 48.63 billion, YoY +7.2%

• 2026 Forecast: RMB 52.15 billion, YoY +7.2%, stable growth, entering a cycle of stock upgrades

Breakdown by downstream segment (2025, RMB 48.63 billion structure)

• Smartphone molds: RMB 18.77 billion, accounting for 38.6% (driven by foldable screens, ultra-thin mid-frames, camera brackets)

• TWS earphones, smartwatches, and other wearables: RMB 10.90 billion, accounting for 22.4%

• AR/VR and AI terminal optical precision molds: RMB 7.45 billion, accounting for 15.3%

• Laptops, tablets, chargers, peripherals: approximately RMB 11.5 billion in total, remaining 23.7%

2) Broad-scope Electronic Information Full-Category Molds (including communications, automotive electronics, connectors, die-casting/stamping molds)

The overall scale in 2025 reached RMB 65 billion, accounting for 15% of China's total mold market, second only to automotive molds at RMB 80 billion (19%).

Of which:

• Traditional consumer 3C accounted for 68% (approx. RMB 44.2 billion)

• Automotive electronics, 5G base stations, and AI server liquid cooling molds accounted for 32% (approx. RMB 20.8 billion, the fastest-growing segment)

3) High-End Precision Electronic Molds (micron-level, semiconductor packaging molds)

A separate segment: RMB 35 billion in 2025, growth rate 16.7%, with the largest domestic substitution potential and the highest entry barriers.

III. Global 3C Electronics Mold Market Size

1. Global injection mold total market: USD 326.2 billion in 2025 (approx. RMB 2.3 trillion), with electronics accounting for 22.7%

2. Global 3C consumer electronics dedicated mold market: approximately RMB 520 billion

3. Regional landscape: Asia-Pacific accounts for 41.7% of the global market, with China holding 60% of Asia-Pacific's share – the world's core manufacturing base for 3C molds

IV. Core Growth Characteristics of the Industry

1. Slowing overall growth with structural divergence
   The share of traditional mobile phone molds continues to decline (44.9% in 2025 → 45.1% in 2026, slight decline); AR/VR, AI hardware, and automotive electronics molds are growing at 15%–20%, becoming the main growth drivers.

2. Continuous upward pricing trend
   The average price of high-end ultra-thin, two-shot, and micro multi-cavity molds is RMB 265,000/set, up 47% from 2020, while low-end molds are caught in price wars.

3. Increasing industry concentration
   In 2025, 17 leading enterprises with revenue above RMB 500 million collectively accounted for 38.6% of the market; the top five companies held a 26.4% market share, with orders concentrating on companies capable of micron-level machining and CAE simulation.

V. Regional Output Distribution (Domestic)

1. Yangtze River Delta (Suzhou, Ningbo, Kunshan, Wuxi): 53.8% of output, dominated by high-end precision molds; Wuxi Jiangyin is one of the Yangtze River Delta's mold industry clusters

2. Pearl River Delta (Shenzhen, Dongguan): 28.3%, mobile phone and wearable small-part molds, with delivery speed advantages

3. Chengdu-Chongqing and Bohai Rim: remaining 17.9%, supporting local electronics OEM factories

VI. Key Supplementary Notes

1. Data definition differences: Some reports only cover plastic injection molds, while others include zinc-aluminum die-casting and connector stamping molds, resulting in two mainstream figures of RMB 48.6 billion and RMB 65 billion. For daily analysis of 3C device housings, the 48.6–52.1 billion plastic mold definition is preferred.

2. 2026 growth drivers: foldable screen iterations, AI phones, AR glasses, gallium nitride fast chargers, and automotive intelligent display housing molds; the stock market relies on mold refurbishment and facelift changes to sustain basic demand.

3. Export market: Domestic 3C mold exports account for approximately 28% of the industry's total output value, primarily supplying electronics OEM factories in Southeast Asia, South Korea, Europe, and the Americas.

SG MOLD implements one-on-one technical support – a dedicated person follows the entire process from requirement discussion, design confirmation, to production progress, ensuring 100% translation of your drawing intent into actual part precision. If you have any questions or needs, please feel free to contact us at 19952215599 (same number on WeChat).