-
Walk with Nature, Unite for a New Journey – SG MOLD 2026 Team Building Activity Successfully Concluded05-19 read(373)
SG MOLD recently held a successful team building activity themed “Walk with Nature, Unite for a New Journey.” All employees participated in fun competitions and casual exchanges, deepening mutual trust, relieving stress, and reinforcing corporate cohesion
2026-05-19T15:33:16.000Z -
How to Optimize Mold Flow Analysis to Reduce Mold Trial Costs?05-12 read(444)
This article systematically explains how to optimize mold flow analysis to significantly reduce mold trial costs. It covers pre-analysis DFM checks, standardized workflows, CAD integration, full-process simulation (fill, pack, cool, warp), complex mold ap
2026-05-12T13:46:43.000Z -
How to Reduce the Development Cost of Custom Mold Bases?05-05 read(611)
This article systematically explains practical strategies to reduce custom mold base development costs from four dimensions: design source, supply chain procurement, production validation, and long-term cooperation. It covers DFM analysis, standard part r
2026-05-05T13:30:51.000Z -
How to Properly Clean and Maintain Thread Gauges to Extend Their Service Life?05-04 read(631)
This article systematically introduces five major maintenance procedures for thread gauges: cleaning, rust prevention, storage, usage practices, and regular calibration. It covers every-use wiping, anti-rust oil application, separate storage environmental
2026-05-04T14:40:37.000Z -
How to Interchange DME and MISUMI Standard Components?04-29 read(674)
DME (Imperial) and MISUMI (Metric) components belong to separate systems – no direct interchange. Forced mixing causes accuracy loss or mold damage. The only way to "interchange" is to modify the base to fit the component: guide pins/bushings must be repl
2026-04-29T14:07:15.000Z -
What are the differences between DME and MISUMI standard mold bases?04-27 read(2148)
DME (American) and MISUMI (Japanese) are the world's leading mold base standards. DME uses imperial units, robust construction, emphasizing strength and durability for high-volume applications like home appliances and auto interiors. MISUMI uses metric un
2026-04-27T15:02:28.000Z -
Core Features and Technology Trends of Electronic Mold Bases04-23 read(487)
This article covers technical requirements (ultra-high precision, high stability, intelligence, high efficiency) of electronic mold bases driven by miniaturization and precision trends, provides procurement and supplier selection advice, and outlines rela
2026-04-23T09:23:39.000Z -
Why Do Standard Mold Bases “Fail”? How Can Customization Break Through?04-22 read(505)
Standard mold bases often “fail” when product structures are complex, precision requirements are high, or clamping force is extreme, resulting in flash, deformation, or even scrap. This article analyzes three major weaknesses (complex geometry, insufficie
2026-04-22T13:38:44.000Z
/
/
