-
How to Select Mold Base Material Based on Product Material?05-22 read(154)
This article provides a systematic guide for selecting mold materials based on product material types (general plastics, engineering plastics, corrosive plastics, high-wear plastics, high-surface-quality plastics). It matches common mold steels such as P2
2026-05-22T13:53:20.000Z -
Complete Process, Key Technologies, and Industry Trends of Mold Base Manufacturing05-21 read(160)
This article systematically presents the complete process of mold base manufacturing (cutting, heat treatment, finish machining, assembly & inspection), key technologies (material selection, precision control), and the latest industry trends (large-scale
2026-05-21T14:55:39.000Z -
Walk with Nature, Unite for a New Journey – SG MOLD 2026 Team Building Activity Successfully Concluded05-19 read(163)
SG MOLD recently held a successful team building activity themed “Walk with Nature, Unite for a New Journey.” All employees participated in fun competitions and casual exchanges, deepening mutual trust, relieving stress, and reinforcing corporate cohesion
2026-05-19T15:33:16.000Z -
How to Optimize Mold Flow Analysis to Reduce Mold Trial Costs?05-12 read(183)
This article systematically explains how to optimize mold flow analysis to significantly reduce mold trial costs. It covers pre-analysis DFM checks, standardized workflows, CAD integration, full-process simulation (fill, pack, cool, warp), complex mold ap
2026-05-12T13:46:43.000Z -
How to Reduce the Development Cost of Custom Mold Bases?05-05 read(310)
This article systematically explains practical strategies to reduce custom mold base development costs from four dimensions: design source, supply chain procurement, production validation, and long-term cooperation. It covers DFM analysis, standard part r
2026-05-05T13:30:51.000Z -
How to Properly Clean and Maintain Thread Gauges to Extend Their Service Life?05-04 read(342)
This article systematically introduces five major maintenance procedures for thread gauges: cleaning, rust prevention, storage, usage practices, and regular calibration. It covers every-use wiping, anti-rust oil application, separate storage environmental
2026-05-04T14:40:37.000Z -
How to Interchange DME and MISUMI Standard Components?04-29 read(371)
DME (Imperial) and MISUMI (Metric) components belong to separate systems – no direct interchange. Forced mixing causes accuracy loss or mold damage. The only way to "interchange" is to modify the base to fit the component: guide pins/bushings must be repl
2026-04-29T14:07:15.000Z -
What are the differences between DME and MISUMI standard mold bases?04-27 read(393)
DME (American) and MISUMI (Japanese) are the world's leading mold base standards. DME uses imperial units, robust construction, emphasizing strength and durability for high-volume applications like home appliances and auto interiors. MISUMI uses metric un
2026-04-27T15:02:28.000Z
/
/
